How to Care & Clean Facial Machine

Spa technology may cost a lot at first, but they are a good investment that saves you time from going to a salon every so often. Take care of your investment so that it lasts longer, and maintains its...

You will need:

• Facial Machine
• Soft cloth (slightly damp or dry)

• When using the Fyola, never place it on the table nozzle down. Always place it back in the charger.
• When finished using the Facial Machine, turn it off.
• Wipe the nozzle using the soft cloth.
• Place back into the holder to charge.

Note:
- Facial Machine will turn off automatically after 2 minutes of non-usage.

Warning:
- Do not place the Facial Machine in the dishwasher, or submerge it in water.
- Never place the Fyola on the table, nozzle down. Whether it is turned on, or off.

How to Choose Gel/Lotion

When using beauty technology it is good to know what you are using, and how it will benefit you. Not using, or following the guidelines accordingly can result in ruining your beauty investment, but may also affect your appearance as well. With the Facial Machine there are different settings that requires either using a gel, or lotion. Learn when to use which one, for better looking skin.

You will need:

• Facial Machine
• Ultrasonic Gel
• Lotion (Organic recommended)

• Choose what facial focus you would like to target. (I.e. Cleansing, massaging, nutrition, lifting, etc.)
• Use Ultrasonic Gel – only for cleansing or massaging, unless otherwise specified by the manual.
• Use Lotion – only for any cosmetic focus (i.e. skin firming, etc.)
• Apply gel or lotion generously, and evenly to the face.
• Turn the Facial Machine on, and select your appropriate setting.
• Select accordingly to the manual, either Ultrasound or Galvanic mode.
• Begin your facial massage session, using Facial Machine as instructed in manual.

Note:
Use organic lotion, as nutrients from the lotion is being pushed into your skin. This will avoid pushing chemicals and preservatives into your body.

How to Firm skin with Facial Machine

The “Lifting” feature on the Facial Machine, is great for improving the elasticity & tone of your skin. It activates elastin & collagen by using positive and negative ions.

You will need:

• Facial Machine
• Organic Lotion
• Soft cloth (slightly damp/dry)

• Remove any make up, and wash your face with a foam cleanser or natural soap.
• Apply lotion evenly around your face – be generous. Too little may not allow the facial massager to work as effectively.
• Turn Facial Machine “On”.
• Press “STEP” button, and select (L.) for “Lifting”.
• Select both ion & ultra mode (Both red & green light get turned on).
• Select your level (low, medium, high). For medium, both lights for LOW & HIGH will be turned on.
• Begin your facial massage session. Massage in a continuous circular motion, maximum 4 minutes per area.
• Press the massager for 2 seconds at one spot on your face, then move to next spot. Do not stop longer than 2 seconds! This will enhance the absorption of skin nutrients.
• After using, clean this machine accordingly using a soft cloth and place back in its holder.

Note:
- You may not feel the Facial Machine, but it is working. Ultrasonic waves vibrate quickly that you are not able to feel it.

- You will notice the Facial Machine is working when the light on the back, lights up when the Facial Massager is placed on the skin.

- If you want to test the Facial Machiner to see if the ultrasound is working. Put a drop of water on the nozzle of Fyola. Turn it on, select (C.) Cleansing and Ultrasound mode only. Place your index finger lightly to the nozzle head. You will begin to see the water vibrate.

Warning:
When not using the Facial Machine, or during usage, never place the Facial Machine on the table, nozzle down. This will damage the machine. Always place back in the charger to hold.

Do not submerge this machine in water.

How to Reduce acne with Facial Machine

You will need:

• Ultrasonic Gel
• Facial Machine
• Steam towel
• Moisturizer (optional)

Pimples and acne are annoying to have, and it makes us insecure about our appearance when we have a lot. But we don’t want to pop them, because that can cause scarring and push the bacteria further into our skin. So what happens when face washes won’t do the trick? The more effective method is exfoliating with an ultrasonic facial massager, like Facial Machine.

• Remove any make up, and wash your face with a foam cleanser or natural soap.
• Apply ultrasonic gel evenly around your face – be generous. Too little gel may not have the ultrasound work as effectively.
• Turn Facial Machine on, and select setting (C.) for Cleansing.
• Select Ultrasound mode only.
• Select your level (low, medium, high). Medium is selected when both low & high lights are both turned on.
• Move the nozzle in a smooth circling motion. Moving in an outward and upward direction. Never stop. No more than 4 minutes per section.
• After cleaning, place the Fyola back in its charger.
• Wipe off ultrasonic gel gently using a steamed towel.
• Wash your face with cold water, or a clean cold towel.
• Apply moisturizer.

How to Reduce Wrinkles

Facial Machine is the only spa patent technology of its kind to offer settings of different facial sessions. Reduce the appearance of wrinkles is one of the beneficial selections of this facial massager.

You will need:

• Facial Machine
• Organic Lotion
• Soft cloth (slightly damp/dry)

• Remove any make up, and wash your face with a foam cleanser or natural soap.
• Apply lotion evenly around your face – be generous. Too little may not allow the facial massager to work as effectively.
• Turn Facial Machine “On”.
• Press “STEP” button, and select setting 6 (W.) for Wrinkle Care.
• Select both ion & ultra mode (Both red & green light get turned on).
• Begin your facial massage session. Massage in a continuous circular motion, maximum 4 minutes per area.
• Press the massager for 2 seconds at one spot on your face, then move to next spot. Do not stop longer than 2 seconds!
• After using, clean Fyola accordingly using a soft cloth and place back in its holder.

How to Use galvanic & ultrasonic combined

Facial Machine is the only spa patent technology of its kind to offer both ultrasound waves and galvanic ions at the same time. This allows Fyola to reach deeper into the skin, for both a better clean and helping nutrients penetrate the skin.

You will need:

• Facial Machine
• Organic Lotion
• Soft cloth (slightly damp/dry)

• Remove any make up, and wash your face with a foam cleanser or natural soap.
• Apply lotion evenly around your face – be generous. Too little may not allow the facial massager to work as effectively.
• Turn Facial Machine “On”.
• Press “STEP” button, and select your facial setting (ie. Nutrition, Lifting, Whitening, or Wrinkle Care).
• Select both ion & ultra mode (Both red & green light get turned on).
• If allowed, select your level (low, medium, high). For medium, both lights for LOW & HIGH will be turned on.
• Begin your facial massage session. Continuously moving in a circular motion, never stopping.
• After using, clean Fyola accordingly using a soft cloth and place back in its holder.